Monday, April 07, 2014

Melt & Pour Soap: Make a Minion Soap



We are back with soaping ideas.

Last week I asked Sophie Soap Chick to come up with a Minion soap based on a project I did with my grandkids. She ran with the idea and all I can say is WOW!




My grandkids are on spring break this week but this will be a soaping project for us to do once they return. What's not to love about this soap?

Place this soap on the ledge of the bath tub  and I guarantee they be excited to clean up after a day of playing at the school playground or park.

I'm thinking we need to make a few girly minions in pinks and purples. How about braided hair?

There are so many variations you can do with this design. Supplies needed and how-to instructions are given below.




SUPPLIES FOR BODY

Start with the main body


  1. Melt down white soap base (see instructions here)
  2. Mix together the Orange Oxide, Yellow Oxide, and Neon Yellow to create the perfect “Minion” yellow color 
  3. Add fragrance and mix until ingredients are thoroughly blended.
  4. Spray inside the 2-inch Tube Mold with rubbing alcohol to make sure the soap will come out easily when set. 
  5. Place the black rubber cap on the base of the tube, then pour soap into tube mold. Do not pour all the way to the top.

While the body is setting up in the tube, move on to making the round heads. Use the Large Bath Bomb Mold from Mold Market and used the same yellow “Minion” color as above. Only fill the mold cavities half way to make sure the head is not too large for the 2-inch diameter tube.


While the body and heads contain to set up, begin to make colors for the goggles, eyes, hands, feet, hair, mouth, pupils, and overalls. To make these, use an 8-inch Silicone Jelly Roll Tray. Make sure to spray rubbing alcohol between each poured layer.


 
 

To create hands, feet, hair, mouth, and pupils:
  1. Use Clear Soap Base (around 2.5 oz.)
  2. Mix with Black Colorant (TINY drop, a little goes a long way)
  3. Add Fragrance
  4. Spray Alcohol spray in the tray
  5. Pour a thin layer
  6. Spray alcohol spray on the layer (Will make bubbles go away)
  7. Allow to set until dry


To create goggles:
  1. Use White Soap Base (Around 2.5 oz.)
  2.  Mix with Black Colorant, again small drop
  3. Add Fragrance
  4. Spray Alcohol spray in the tray
  5. Pour a thin layer
  6. Spray Alcohol on the layer
  7. Allow to set until dry


To create the overalls:
  1. Use White Soap Base (Around 2.5 oz.)
  2. Mix in Neon Blue (2 drops)
  3. Add Fragrance
  4. Spray alcohol spray in the tray
  5. Pour a thin layer
  6. Spray Alcohol on the layer
  7. Allow to set until dry




All of these items were carved by hand with the Recessed Smoother Soap Tool. This item is CRUCIAL for the Minion. It helped me put a twist on how I wanted my “Perfect Minion” to turn out like I wanted.

I did a couple different mouths and there are so many options to make them show different feelings. Just make sure to ALWAYS smooth out the edges with the Recessed Smoother Soap Tool to make him look real and not so much like a box.

To attach all the parts in the end, I used the same tool to scoop some melted clear soap base and then stuck the pieces on. I found it easy to work from the bottom up starting with attaching the overalls and feet first, rather than the eyes and goggles.

Overall, to complete my perfect minion it took me a few hours due to drying time and carving all kinds of different faces and options to make my perfect one.

Hope you enjoy!

Sophie

 
 

 

1 comment:

Alisha said...

This is too cute! Great job.